Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Electronics

Wahoo RPM Cadence Sensor (BT/ANT+)
$39.99
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
Wahoo RPM Speed Sensor (BT/ANT+)
$39.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
Wahoo TICKR FIT Heart Rate Armband
$79.99
TICKR FIT heart rate armband uses optical heart rate technology to provide accurate heart rate and calorie burn data in the most comfortable form factor yet! Equipped with Bluetooth and ANT+ technology to seamlessly pair with fitness apps, smartphones, and GPS bike computers and watches. Worn on the forearm, the TICKR FIT heart rate monitor comes with an adjustable band that is designed for your most grueling workouts including running, cycling, fitness classes, and more. TICKR FIT has water-resistant technology and a rechargeable battery that lasts up to 30 hours. - Dual band technology - Real time heart rate and calorie tracking - Advanced performance material - USB rechargeable battery - LED indicator lights - Two adjustable bands included - Third party app compatibility - Apple watch and apple TV integration
Delta Hefty Holder Plus
$39.99
Instant bike dashboard Securely hold any phone with any case. Easily mounts on stem (cap or neck) or handlebar to access maps and apps while riding. Features - Secure: Weatherproof bungee and patented cam lock - Compatibility: Works with all phones and cases (including OtterBox and LifeProof cases). Sliding system allows for instant in/out on the go - Construction: Precision molded thermoplastic - Quick Assembly: Handlebar and stem mounts included. Secures to handlebar diameters up to 1 3/8-inch/35 mm - Versatile: Includes additional ElastoMount to connect to any bar and for quick on/off - Weight: 0.24 lbs / 110 grams
Delta Smartphone Caddy II
$29.99
The Smartphone Caddy II is designed to securely hold iPhone 6, 6s, SE, 5, 4.7" Android Devices, and most smartphones with protective cases. Don't waste time prying your smartphone out of bulky holders or changing between cycling specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. A securing cam lock adds additional security to your device during those extra bumpy moments. Compatibility: - Devices/cases up to a maximum: 5.5 x 2.9 x .625 inches (H x W x D) - Handlebars up to 1-3/8-inch diameter
Delta XL Smartphone Holder
$29.99
Universal Fit The XL Smartphone Holder is designed to securely hold iPhone 6 Plus, 6s Plus, Android Devices, and most larger style smartphones with protective cases. Compatible with devices/cases up to: 7.8 x 3.5 x 0.5 inches (H x W x D) Easy, Instant Removal Don't waste time prying your smartphone out of bulky holders or changing between cycling-specific phone cases. The Smartphone Holder features a durable elasticated bungee for easy in/out access of your device. Although engineered to withstand heavy road vibrations and other bumps, the secure bungee is still stretch friendly. Positioning On Your Terms Delta understands that your handlebars are very precious real estate. That is why they include a stem cap and handlebar mounting bracket with each Smartphone Holder. A clever ratcheting system on each mounting bracket allows you to adjust the viewing angle of your device. Weather Protection Bag (Included) Protect your device from rain, sweat, etc.. with the included waterproof baggy. Touchscreen is still accessible while your smartphone is in the bag. Securing Cam Lock The securing cam lock adds additional security to your device during those extra bumpy moments.
CatEye Padrone Digital Double (Head Unit Only)
$69.99
Head Unit Only Meet your perfect riding & training partner and use it with your favorite 3rd party bluetooth smart sensors. FEATURES - Large, 3-row screen with up to four data displays - Upgradable to triple wireless with the optional heart rate sensor - Compatible with Bluetooth SMART sensors - Automatic sensor and tire recognition applicable to multiple bikes - ClickTec button interface - Auto start / stop - Pace arrow - Programmable display - Sensor battery alarm - Programmable odometer - Setup on menu screen or with smartphone app Cateye Cycling - Import a summary of ride data and upload to CATEYE Atlas, Strava and TrainingPeaks via Cateye Cycling app - FlexTight universal bracket FUNCTIONS - Current / average / maximum speed - Current / average / maximum cadence - Current / average / maximum heart rate (optional) - Total distance - Trip distance 1 & 2 - Moving time - Clock TECH SPECS - Current speed: 0.0(4.0)~105.9km/h [0.0(4.0) - 65.8 mph] - Average speed: 0.0~105.9km/h [0.0(4.0) - 65.8 mph] - Maximum speed: 0.0(4.0)~105.9km/h [0.0(4.0) - 65.8 mph] - Total distance: 0.0~99999.9/100000-999999km
CatEye Universal Wheel Magnet
$5.99
Wheel magnet for all CatEye cycle computers
Bryton Aero 60E
$189.99 $229.99 17% Off
Aero 60 is Bryton's first Aerodynamic GPS Cycling Computer for road bikes. With precisely engineered dimple design wrapped around its back and the brand new Aero Mount developed as an integrated system to reduce air drag, Aero 60 not only provides powerful features, but it's also built to be highly aerodynamic so you can ride fast just like the wind. Aero 60 also comes with pre-loaded OpenStreetMap and full GNSS support, allowing you to follow planned trips under precise positioning. Feature - Aerodynamic design - Pre-installed OSM Map for easier guidance. - Supports electronic shifting systems of Di2 (Shimano), eTap (SRAM) and EPS (Campagnolo) - Workout planning via Bryton app. - Supports TrainingPeaks workouts. - 2.3" b/w Large Display - Full GNSS Support GPS+Glonass+BDS+Galileo+QZSS - STRAVA and TrainingPeaks Auto Sync. - Supports GoldenCheetah (PC software) Specs: - Display: 2.3 inches Mono LCD - Battery Hour: 32 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° - ANT+/BLE Sensor Support In The Box: - Aero 60 - Aero Mount - USB Cable - Safety Lanyard - Quick-Start Guide
Bryton Rider 410E
$149.99
Rider 410 is Bryton's first GPS bike computer with FULL Global Navigation Satellite System support, providing faster acquisition and more precise positioning than ever before. It's 2.3" large display allows you to view 8 data at a glance, so you can train more efficiently. Rider 410 also supports both ANT+ and BLE activity sensors for maximum compatibility. Engineered for cycling lovers all over the world! Simply Precise - Designed for riders' best convenience, Rider 410 incorporates FULL Global Navigation Satellite System, allowing you to get GPS fixed much faster and have more precise positioning, and it gives maximum compatibility by working perfectly with both ANT+ and BLE sensors. Bigger Display, Better View - Designed for your better viewing experience, Rider 410 is built with crisp black and white 2.3” large display, making reading data become easier than ever. It can fit up to 8 data per page for you to have better understanding of your real-time performance. Absolute Precision - Bryton's first GPS cycling computer with GNSS full support incorporates GPS, Glonass (Russia), BDS (China), Galileo (Europe) and QZSS (Japan) satellite systems, providing a much more reliable satellite coverage in any situation especially when there are buildings/trees or even while mountain biking, along with faster start-up. ANT+/ BLE Sensors Support - Aiming for the most convenience, both ANT+ and BLE sensors work perfectly with Rider 410 after simple pairing. Customizable Data Display via App - Tailor your own data display with Bryton Active App! After pairing with Bryton Active App, you can customize your data fields/pages based on your training goals via BLE on your phone. It's super easy to use. Supports Up to 72+ Functions - Rider 410 provides rich data for you to fully grasp the performance of your ride. It incorporates up to 72+ functions including Time, Speed, Distance, Calorie, Cadence, Altitude, Power and HR. 35 Hours of Battery Life - If you love riding long distance on roads, Rider 410 certainly meets your needs. It provides up to 35 hours of battery life and allows you to charge via power bank while recording. Smart Notifications - Never worry about missing important phone calls, emails or texts during rides again! Rider 410 provides notifications whenever phone calls, emails or text messages are received after simple BLE pairing with Android/iOS smart phones. Sync to Bryton Active App - Enjoy seamless over-the-air synchronization with all new Bryton Active App. Workout data can be automatically synced via BT from the device to the Bryton Active App, where progress and graphical analysis can be viewed, and rides can be shared to social media. It allows users to sync and plan workouts, downloads planned trips, modify device and grid settings, and calibrate altitude all without WLAN connection. The app will also check the firmware version and GNSS data of the device and notify users that updates are available, ensuring that the most up-to-date firmware is always installed. With simple setup, Bryton Active App’s STRAVA, TrainingPeaks and Selfloops Auto Sync also make it easier to share activities and compare with millions. STRAVA, TrainingPeaks and Selfloops: Auto Sync - Compete with worldwide riders through Rider 410 recorded data.Workout files are automatically saved in FIT format, which can then be uploaded to popular training sites. It is also super easy to sync activities from the Bryton Active App to Strava/TrainingPeaks/Selfloops by pairing accounts. What's even better is the Rider 410 supports professional training applications, such as GoldenCheetah, for detailed post-workout analysis. - 2.3" b/w Large Display - 35 hours of battery life. - Full GNSS Support GPS+Glonass+BDS+Galileo+QZSS - Smart Notifications - Customizable Data display via Bryton App. - ANT+/BLE dual band support. - Supports GoldenCheetah (PC software) - Supports up to 72+ functions - Built in barometer for altitude - Supports power meter - Bluetooth smart for quick and easy data transfer - STRAVA and TrainingPeaks Auto Sync Specifications: - Display: 2.3 inches Mono LCD - Battery Hour: 35 Hours - GPS: High-Sensitivity Chipset - Waterproof: IPX7 - Alerts: Yes - Lap history: 130 laps - Log history: 300 hours - Heart rate zones: 7 zones - Operating Temperature: -10C° ~ 50C° In the Box: - Rider 410 - Bike Mount - USB Cable - Safety Lanyard - Quick-Start Guide
Bontrager 4mm Cadence Band Magnet
$7.99
Get your computer dialed with the perfect magnet Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. - Universal crank magnets sized for your bike and sensor - Compatible with all cadence sensors
Bontrager Blendr Garmin Low Mount
$19.99
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Bontrager Computer Batteries
$3.99 - $5.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Bontrager DuoTrap Digital Speed/Cadence Sensor
$69.99
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
Bontrager DuoTrap S Digital Sensor
$69.99
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes
Bontrager Interchange ANT+ Speed Sensor
$19.99 $34.99 43% Off
Bontrager's Interchange ANT+ Speed Sensor is a speed sensor that wirelessly transmits your data to a variety of ANT+ enabled receiving devices including Bontrager Node computers (sold separately). It includes an aero wheel magnet and silicone mounting straps to fit most forks, making installation a snap.
Bontrager RIDEtime Cycling Computer
$59.99
A simple, user-friendly cycling computer that displays speed, distance, and even calories burned. The Bontrager RIDEtime Computer gives you the ride metrics that matter most in a sleek, user-friendly package. A large, easy-to-read screen makes it simple to track your speed, time, and distance, and more! Product details - Intuitive one-button control with hands-free scroll mode - 2" screen size with easy-to-read digital display - Trek Certified Service reminders based on selected bicycle type - Key features include speed (current, avg., max.), distance (trip, total), time (clock, timer), and calories burned - Sensor includes magnet guidelines to simplify setup and installation - Includes mount, analog sensor, CR 2032 battery, and wheel speed magnet
Bontrager SpeedTrap Digital Speed Sensor
$19.99 $34.99 43% Off
Bontrager's SpeedTrap Digital Speed Sensor conveniently plugs into any Bontrager fork with SpeedTrap technology for the ultimate in convenience. And, it wirelessly transmits speed data to your ANT+ cycling computer.
BiKASE Beetle 6
$34.99
The Beetle 6 is a larger version of the BiKASE Beetle that has been stretched to accommodate the iPhone 6/6S Plus and other large mobile phones. Storage space underneath phone compartment for energy bar, wallet, keys, or tools. Mounts securely to the top tube using Velcro straps and shock cord around stem. - Pocket fits iPhone 6/6S Plus and other larger smart phones - Clear cover allows device visibility and operation - Mounts to top tube or stem - 2 multi positional straps & shock cord for mounting - Internal lastic stiffener and anti-slip fabric bottom - dual zippers - 8" x 4" x 2"
BiKASE Super Band
$19.99
Molded with Polycarbonate and Silicone rubber. Mounts to bike frame with rubber oring or use braze ons on bike. The 2 elastic bands will hold a phone, energy bar, pump, or sunglasses.
BiKASE Tablet Stand
$99.99
The Tablet Stand from BiKASE is a freestanding Tablet holder designed for indoor training. In order to take advantage of the many sizes of bikes and heights of riders, the Tablet Stand uses a telescoping tripod design to accommodate any rider. On top of the height adjustment, the tablet clamp can rotate a full 360°. Don't let you tablet go to waste during your grueling training sessions! Put it to work with the tablet stand from BiKASE. Features: - Works with iPad Mini, iPad, Surface and most tablets. - Telescoping stand - Full rotation - Comes with carrying bag
Zipp QuickView TT Computer Mount
$22.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Trek Madone SLR Blendr Duo Base
$19.99
Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware
Trek Madone SLR Blendr Mono Base
$19.99
Allows use of one Blendr mount on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look
Shimano BMDN100 Di2 Long Battery Mount for External Wiring
$121.99
Shimano Di2 External Battery Mounts - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Shimano STEPS CITY E6000 Cycling Computer
$74.99
Smooth and Silent Riding with INTELLIGENT POWER : Discover high-level E-bike performance. Shimano STEPS lifts E-bike enjoyment to the next level by optimally balancing range, lightweight performance, and low noise—with battery power to spare. SENSOR TECHNOLOGY : Shimano STEPS incorporates sensors that pick up information about torque, speed, cadence, and crank position so that the system can provide smooth and optimally matched pedaling force. - Displayed parameters: assist mode, battery charge level gear position, estimated range, range overview - Intuitive display layout
Shimano Short Battery Mount External/Internal Wiring
$119.99
Shimano Di2 External Battery Mount - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware
Saris BLE USB Adapter for PC
$29.99
BLE USB Adapter gives Rouvy virtual training software the ability to seamlessly connect to Bluetooth devices and sensors. The adapter contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including Saris smart indoor bicycle trainers and power meters. Most importantly, the BLE USB Adapter is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth adapter for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
SRAM QuickView Adaptor
$5.00
The QuickView was designed to put the Garmin Edge Computer out in front of the stem. Fits Garmin 605 and 705. - Glass-filled nylon, stainless steel Torx T25 bolt - Weight: 20g
SRAM QuickView Computer Mount (MTB)
$22.00
SRAM's QuickView Computer mount delivers an uncomplicated computer mount that‘s easy to install, lightweight, and above all, vibration and slip-free. At only 20 grams, with a single torx T25 bolt, flexible mounting clasp, and a 1/4-twist mount, it installs quickly, simply and securely on any 31.8mm handlebar. It works great with computers that use a 1/4-turn twist lock interface.
Page 1 of 3 Next page